Find answers, ask questions, and connect with our <br>community around the world.

  • Posted by CHRISTOPHER on July 16, 2023 at 6:03 pm

    Hi sir, I got struck in turbo machine challege from Ansys. I performed revolve for shroud but I cannot substracte the blade from shroud. Furthermore I cannot able to revovle the blade. Kindly give guidance to complete the project

    Sandeep replied 9 months ago 2 Members · 1 Reply
  • 1 Reply
  • Sandeep

    Administrator
    July 16, 2023 at 9:05 pm

    Hi Christopher,

    You don’t need to revolve the hub and shroud. You are already provided with the sector model. There are some tiny issues that you have to resolve and create a solid out of it. Now you will see only surfaces. But the hub, shroud, and blade are inside.

    Just correct the geometry in SpaceClaim, give proper naming and mesh as the periodic sector as we did in the meshing section of this course. Once that is done take to fluent and revolve (copy) and create a full 360-degree model.

    Mesh volute separately and bring to fluent and apend the mesh.

    After that setup the case and run as shown in the video.

    Regards

    Sandeep

Log in to reply.

error: Content is protected !!