Find answers, ask questions, and connect with our <br>community around the world.

Home Forums OpenFOAM Forum skewness

  • Barış Bicer

    November 15, 2022 at 5:15 pm

    Hi Ali,

    In order to reduce the skewness, you should play with your geometry especially with the sharp corner and sides.

    By the way, the skewness value below 10 will work well in OpenFOAM. (From my experience)

    Here you skewness value is only 4.8 where it is nothing and looks really nice mesh.

    Last thing, sometimes due to complex geometries you cant reduce your skewness as much as you can, therefore many solvers works with some tricks to overcome high skewness.

    For your info.


Log in to reply.

error: Content is protected !!