Find answers, ask questions, and connect with our <br>community around the world.

Home Forums ANSYS Fluent Beginners to Advanced level Lesson 9: Concept of share topology

  • Lesson 9: Concept of share topology

    Posted by Thasiru on February 19, 2024 at 3:20 pm

    Sir I tried to apply share topology to a valve geometry taken from the GrabCAD website, I opened the file in Space claim and fixed all the errors, such as intersections, extra edges, and all. But when I try to create the surface mesh it shows this error. Can I know how to fix this geometry?

    MIDHUN replied 1 month, 3 weeks ago 2 Members · 3 Replies
  • 3 Replies
  • MIDHUN

    Member
    February 20, 2024 at 10:41 am

    Hi Thasiru,

    Since its an external geometry we cannot exactly comment on the issue . You can do a check geometry in spaceclaim(right click solid body) and see if its fine also inorder to confirm did you perform any volume extraction in spacelaim .This can also be issue with faceting so you can also try to check that.

    Regards

    Flowthermolab SupportTeam

    • Thasiru

      Member
      February 20, 2024 at 7:30 pm

      No sir I didn’t do any volume extraction.

      • MIDHUN

        Member
        February 21, 2024 at 9:34 am

        Hi

        Then it could be issue with facets in mesh or inherent error in geometry .Please use spacelaim to check it.

        Regards

        Flowthermolab SupportTeam

Log in to reply.

error: Content is protected !!