Find answers, ask questions, and connect with our <br>community around the world.

Home Forums ANSYS Fluent Beginners to Advanced level Lesson 7: Meshing external flow case

  • Rahul

    February 5, 2024 at 3:00 am

    Hi Thasiru,
    It seems you have given the geometry type as “This region consists only of solids”. As this is an external flow problem, the geometry should consist only of fluid regions only, and the interior of the body does not need to be meshed. This could be the reason for the error.
    Best regards
    Flowthermolab support

Log in to reply.

error: Content is protected !!