Find answers, ask questions, and connect with our <br>community around the world.

Home Forums CFD foundation course: Forum Hydraulic diameter

  • Sandeep

    January 31, 2022 at 10:02 pm

    Good question Ezekiel.
    In CFD simulations, especially for internal flow problems, you can specify the turbulence boundary conditions based on hydraulic diameter. Also sometimes if your cross-section is not the very standard one and you need to calculate the Reynolds number then you can calculate based on hydraulic diameter.
    You can calculate based on the perimeter and the area of the cross-section.

    More info:

  • Ezekiel J

    February 3, 2022 at 6:47 am

    Thank you sir.

Log in to reply.

error: Content is protected !!