Find answers, ask questions, and connect with our <br>community around the world.

Home Forums OpenFOAM Forum error

  • Posted by Srinivas on April 28, 2023 at 5:06 am

    Time = 71

    smoothSolver: Solving for Ux, Initial residual = 0.000831513, Final residual = 7.88621e-05, No Iterations 9
    smoothSolver: Solving for Uy, Initial residual = 0.0030717, Final residual = 0.000247608, No Iterations 10
    smoothSolver: Solving for Uz, Initial residual = 0.00108084, Final residual = 8.91953e-05, No Iterations 10
    GAMG: Solving for p, Initial residual = 0.000962649, Final residual = 8.36932e-06, No Iterations 6
    time step continuity errors : sum local = 2.19295e-05, global = 2.47433e-07, cumulative = -1.87537e-06
    smoothSolver: Solving for omega, Initial residual = 0.000128956, Final residual = 8.08108e-06, No Iterations 4
    smoothSolver: Solving for k, Initial residual = 0.000140931, Final residual = 7.76795e-06, No Iterations 4
    ExecutionTime = 3172.66 s ClockTime = 3173 s

    forces forces write:
    sum of forces:
    pressure : (27.1112 -0.0324239 382.625)
    viscous : (8.11018 -0.000115661 -0.363329)
    porous : (0 0 0)
    sum of moments:
    pressure : (0.1021 -10.5868 -0.0192167)
    viscous : (0.000533018 0.606174 0.00174797)
    porous : (0 0 0)

    Time = 72

    smoothSolver: Solving for Ux, Initial residual = 0.000812446, Final residual = 7.7485e-05, No Iterations 9
    smoothSolver: Solving for Uy, Initial residual = 0.00306457, Final residual = 0.000248658, No Iterations 10
    smoothSolver: Solving for Uz, Initial residual = 0.00107551, Final residual = 8.92656e-05, No Iterations 10

    job aborted:
    [ranks] message

    [0-10] terminated

    [11] process exited without calling finalize

    [12-15] terminated

    —- error analysis —–

    [11] on UNLRNDMAIN
    simpleFoam ended prematurely and may have crashed. exit code 3

    —- error analysis —–

    Barış Bicer replied 11 months, 4 weeks ago 2 Members · 2 Replies
  • 2 Replies
  • Srinivas

    Member
    April 28, 2023 at 5:08 am

    My solution is not Diverge but Simulation Stop
    whats the reason?

  • Barış Bicer

    Moderator
    April 28, 2023 at 6:20 pm

    memory problem?

Log in to reply.

error: Content is protected !!