FlowThermoLab
  • 20+ years of industrial CFD
  • ISO 9001 and ISO/IEC 27001 certified
  • NDA before you share data
  • Innovate UK supported
  • Teams in the UK and India
Service 01 · CFD simulation

Flow and thermal analysis for your product

We model the physics behind your design decision, check it against data or reference results, and report results your team can act on.

What we analyse

  • TurbomachineryPumps, fans, compressors and turbines
  • Aerodynamics and aeroacousticsExternal flow, drag and fan noise
  • Thermal managementHeat sinks, heat exchangers and electronics cooling
  • Multiphase flowSprays, liquid jets, free surfaces and cavitation
  • E-mobilityMotor, rotor and battery cooling
  • HVAC and ventilationAir flow and thermal comfort in spaces

You receive

  • Validated CFD model
  • Report with results and recommendations
  • Handover meeting

We work in FTL FlowSuite and OpenFOAM, and in commercial codes where a project needs them.

Service 02 · Fire simulation

Fire and smoke simulation with FDS

Performance-based fire engineering with NIST's Fire Dynamics Simulator (FDS): how smoke and heat spread, and whether ventilation keeps escape routes clear.

What we model

  • Car parksJet-fan and extract ventilation
  • Large buildingsAtria, warehouses and shopping centres
  • Smoke controlMechanical and natural ventilation strategies
  • Fire scenariosFire location, growth and heat release rate

You receive

  • Smoke layer, visibility and temperature over time
  • Ventilation performance
  • Animations for design review
  • Technical report
FDS smoke simulation of a fire in an underground car park by FlowThermoLab, with a close-up of the smoke plume
Underground car park model in FDS
Service 03 · Bespoke FlowSuite solutions

FlowSuite workflows built for your product

We turn your simulation method into an automated FTL FlowSuite workflow, validated against your data. Your design engineers then run it on every design change, with no CFD expertise needed.

How it works

  1. Share your productGeometry, operating conditions and the results you need
  2. We build and validate the workflowMeshing, models and report set up and checked against your data
  3. Your team runs itThe same validated method on every design, on FTL Cloud HPC
FTL FlowSuite centrifugal pump simulation
Centrifugal pump in FTL FlowSuite
Service 04 · Moving to OpenFOAM

Move your team to OpenFOAM

Complete OpenFOAM training for your engineers, from scratch, built around your products. Your team learns to mesh, solve, run in parallel and customise solvers on the cases they work on every day.

What your team learns

  • MeshingFrom simple blocks to complex CAD with snappyHexMesh
  • Solver set-upBoundary conditions, schemes and convergence
  • Different solversIncompressible, compressible, heat transfer, multiphase and rotating machinery
  • Running in parallelDecomposing cases and running on HPC clusters
  • Solver customisationModifying solvers and writing boundary conditions and models
  • AutomationScripts and templates for repeatable workflows

You receive

  • Training on your own cases
  • Case templates and scripts
  • Custom solvers where needed
  • Support while your team takes over

Run your OpenFOAM cases on FTL Cloud with no per-core licence costs. About FTL Cloud

OpenFOAM programme for your team

Built on your own products and cases, from first steps to custom solvers.

  1. FoundationsLinux, case structure, dictionaries and best practice
  2. MeshingblockMesh, snappyHexMesh, importing meshes and mesh quality
  3. Solvers and set-upChoosing and setting up the right solver for your physics
  4. Running in parallelDomain decomposition, HPC clusters and scaling
  5. Post-processingParaView, function objects and automated reports
  6. CustomisationModified solvers, new boundary conditions and models in C++
Service 05 · AI and ML for engineering

Practical AI and machine learning for simulation teams

Use the simulation data you already have to design faster. We help engineering teams start with AI and machine learning in a way that fits their CFD work.

Where we help

  • Surrogate modelsFast predictions trained on your CFD results
  • Design explorationML-assisted DoE and optimisation
  • Simulation data pipelinesCollect, clean and organise your results for ML
  • Workshops for engineersHands-on AI and ML for your team

You receive

  • Pilot project on your data
  • Working model and code
  • Trained team
Service 06 · Custom CFD training

CFD training built around your team

Courses designed for your engineers, your applications and your software, from foundations to advanced topics.

Topics we teach

  • CFD foundationsTheory, meshing and best practice
  • OpenFOAMFrom first case to custom workflows
  • Ansys Fluent and STAR-CCM+Set-up, solving and post-processing
  • Turbomachinery CFDPumps, fans, compressors and turbines
  • HPC for simulationRunning CFD efficiently on clusters
  • AI/ML for fluidsMachine learning for flow problems

You receive

  • Course plan agreed with you
  • Hands-on exercises on relevant cases
  • Course material for your team

Formats

  • Live onlineInstructor-led sessions for teams in any location
  • On-siteAt your office, in the UK or India
  • BlendedLive sessions with self-paced Learning Portal courses
  • MentorshipAn expert alongside your engineers on real projects
How we work

A clear process from first call to handover

Fixed scope, cost and deliverables before work begins.

  1. Scoping call

    Your problem, your data, the decision to support.

  2. Proposal and NDA

    Scope, timeline and fixed price. NDA signed first.

  3. Modelling and validation

    Models built, run and checked against your data.

  4. Report and handover

    Full report and a walkthrough with your team.

Led by Dr Sandeep Mouvanal

20+ years of CFD. PhD, IIT Madras · Postdoc, University of Nottingham · Continental, Honeywell, HCL.

About FlowThermoLab
  • Our own HPCRuns on FTL Cloud
  • CertifiedISO 9001 and ISO/IEC 27001
  • Right tool for the jobFlowSuite, OpenFOAM, Fluent, FDS
  • UK and IndiaUK lead, India engineering
FAQ

Consultancy questions

Short answers to what clients ask before a project.

Tell us about your problem

A 30-minute call with our engineers to understand it and agree next steps.

Book a meeting Or email consult@flowthermolab.com

Will you sign an NDA?

Yes. An NDA is part of our project process and is agreed before you share geometry, data or requirements.

Which software do you use?

FTL FlowSuite and OpenFOAM for most CFD work, commercial codes such as Ansys Fluent and CFX where a project needs them, and NIST's Fire Dynamics Simulator (FDS) for fire and smoke. We choose the tool that suits the physics and your existing workflow.

Do we need our own HPC?

No. Projects run on FlowThermoLab Cloud, our own HPC service, so you do not need to provide hardware.

What do we receive at the end of a project?

A report covering the modelling approach, validation and results, and a handover meeting so your team can follow what was done. Deliverables are agreed in the proposal.

How much does a project cost?

It depends on the physics, the number of cases and the deliverables. After a scoping call we send a fixed-scope proposal with the price.

Can you help us move to OpenFOAM?

Yes. We train your team in OpenFOAM from scratch on your own products: meshing, solver set-up, running in parallel and customising solvers, with case templates and support while your team takes over.

Can you train our team?

Yes. We run custom training online or on-site, covering CFD foundations, OpenFOAM, Ansys Fluent, STAR-CCM+, turbomachinery CFD and AI/ML for fluids.

How do we get started?

Book a meeting or email consult@flowthermolab.com with a short description of the problem. We then arrange a scoping call and follow it with a proposal.