Home » Case Studies » Spitfire Mk VIII aircraft aerodynamics
Consultancy study · Ansys FluentBenchmark study
Spitfire Mk VIII aircraft aerodynamics
This benchmark study assesses flow patterns and pressure distribution around the Supermarine Spitfire Mk VIII in low subsonic, incompressible flow. The rotating propeller is modelled first with a multiple reference frame (MRF) as a frozen rotor, then with a sliding mesh, and a detached eddy simulation (DES) resolves the unsteady tip and wake flow.
- Aircraft aerodynamics
- Propeller
- MRF
- Sliding mesh
- DES
- 0.044drag coefficient
- 0.432lift coefficient
- 23 Mpoly-hexcore cells
01 · Set-up
Model, mesh and settings
Geometry and domain
| Aircraft length | 9.54 m |
|---|---|
| Wing area | 22.5 m² |
| Domain | 55 m × 55 m × 180 m |
| Domain extent | 10L upstream and downstream, 5L to the sides, 10L above ground |
Mesh and solver
| Solver | Ansys Fluent |
|---|---|
| Mesh | Unstructured poly-hexcore, about 23 million cells |
| Boundary layer | First layer 1 mm, 10 layers |
| Turbulence | k-ω SST (steady), then DES |
| Propeller | MRF frozen rotor, then sliding mesh |
| Convergence | 1 × 10⁻⁶ for all equations |
Fluid and boundary conditions
| Density | 1.22 kg/m³ |
|---|---|
| Dynamic viscosity | 1.8 × 10⁻⁵ kg/(m·s) |
| Inlet | Velocity inlet, 90 m/s |
| Angle of attack | 8° |
| Outlet | Pressure outlet, 0 Pa gauge |
| Aircraft | No-slip wall |
| Ground and side walls | Symmetry |
02 · Results
What the comparison shows
Highlights
- Steady MRF analysis was followed by sliding mesh and detached eddy simulation of the rotating propeller.
- Lift and drag coefficients were computed: CD = 0.044 and CL = 0.432 at 8° angle of attack.
- Streamlines show the wingtip vortices, and DES resolves the unsteady propeller and tip flow.
References
- Lednicer, D. (1995). A CFD evaluation of three prominent World War II fighter aircraft. The Aeronautical Journal.
- Geometry: Supermarine Spitfire Mk VIII, GrabCAD library.