FlowThermoLab
Validated in FTL FlowSuiteCompared with: NASA wind tunnel · Ansys Fluent 2025 R2

NASA N2A hybrid wing body

This study validates the aerodynamic predictions of FTL FlowSuite against published NASA N2A low-speed wind-tunnel data, with emphasis on force coefficients. Predicted performance and flow fields are benchmarked against both the measurements and Ansys Fluent 2025 R2.

  • External aerodynamics
  • Wind tunnel
  • Hybrid wing body
  • Polyhedral mesh
Predicted velocity at α = 12.55°
  • 0.478CL from FlowSuite at α ≈ 10° (measured 0.545)
  • 9.05 Mpolyhedral cells
  • −15° to 15°angle-of-attack sweep
01 · Set-up

Model, mesh and settings

Domain and mesh

Model scale5.8% wind-tunnel model
Boundary effectsDomain sized to minimise boundary effects
Mesh typePolyhedral
Total cells9,047,449
Maximum non-orthogonality86.4°
Average non-orthogonality5.92°
Maximum aspect ratio113.68
Computational domain: 5.8% wind-tunnel model, symmetry plane at y = 0
3D view of the surface grid
Smooth transition from coarse far field to fine core
Mesh around the sharp trailing edge
02 · Results

What the comparison shows

Highlights

  • FlowSuite results for the NASA N2A configuration agree generally well with the experimental data, with differences below 25% in lift and drag coefficients over the range studied.
  • At α ≈ 10°, FlowSuite predicts CL = 0.478 against 0.545 measured, and Ansys Fluent predicts 0.260.
00.120.240.360.480.6CL0.545Experiment0.260Ansys Fluent0.478FTL FlowSuite
Lift coefficient at α ≈ 10°. Data from this study.
Lift and moment coefficients vs angle of attack: experiment (Gatlin et al., 2012), FlowSuite and Ansys Fluent 2025 R2
Streamlines at α = 12.55°